收藏本站
M1MA174T1
http://onsemi.com
3
PD
=
TJ(max)
± T
A
RθJA
PD
=
150°C ± 25°C
0.625°C/W
= 200 milliwatts
?The soldering temperature and time should not exceed
260°C for more than 10 seconds.
?When shifting from preheating to soldering, the
maximum temperature gradient should be 5°C or less.
?After soldering has been completed, the device should
be allowed to cool naturally for at least three minutes.
Gradual cooling should be used as the use of forced
cooling will increase the temperature gradient and
result in latent failure due to mechanical stress.
?Mechanical stress or shock should not be applied dur-
ing cooling
* Soldering a device without preheating can cause exces-
sive thermal shock and stress which can result in damage
to the device.
INFORMATION FOR USING THE SC±70/SOT±323 SURFACE MOUNT PACKAGE
MINIMUM RECOMMENDED FOOTPRINT FOR SURFACE MOUNTED APPLICATIONS
Surface mount board layout is a critical portion of the total
design. The footprint for the semiconductor packages must
be the correct size to insure proper solder connection
SC±70/SOT±323 POWER DISSIPATION
The power dissipation of the SC±70/SOT±323 is a func-
tion of the pad size. This can vary from the minimum pad
size for soldering to the pad size given for maximum power
dissipation. Power dissipation for a surface mount device
is determined by TJ(max), the maximum rated junction tem-
perature of the die, RθJA, the thermal resistance from the
device junction to ambient; and the operating temperature,
TA. Using the values provided on the data sheet, PD
can be
calculated as follows.
The values for the equation are found in the maximum
ratings table on the data sheet. Substituting these values into
the equation for an ambient temperature TA
of 25
°C, one
can calculate the power dissipation of the device which in
this case is 200 milliwatts.
The 0.625°C/W assumes the use of the recommended
footprint on a glass epoxy printed circuit board to achieve
a power dissipation of 200 milliwatts. Another alternative
would be to use a ceramic substrate or an aluminum core
board such as Thermal Clad?. Using a board material such
as Thermal Clad, a higher power dissipation of 300 milli-
watts can be achieved using the same footprint.
interface between the board and the package. With the
correct pad geometry, the packages will self align when
subjected to a solder reflow process.
SOLDERING PRECAUTIONS
The melting temperature of solder is higher than the rated
temperature of the device. When the entire device is heated
to a high temperature, failure to complete soldering within
a short time could result in device failure. Therefore, the
following items should always be observed in order to
minimize the thermal stress to which the devices are
subjected.
?Always preheat the device.
?The delta temperature between the preheat and
soldering should be 100°C or less.*
?When preheating and soldering, the temperature of the
leads and the case must not exceed the maximum
temperature ratings as shown on the data sheet. When
using infrared heating with the reflow soldering
method, the difference should be a maximum of 10°C.
mm
inches
0.035
0.9
0.075
0.7
1.9
0.028
0.65
0.025
0.65
0.025
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
M5010035V MODULE POWER 100A 1200V SCR BRDG
MBR0520LT3 DIODE SCHOTTKY 0.5A 20V SOD-123
MBR0520L DIODE SCHOTTKY 0.5A 20V SOD-123
MBR0530 DIODE SCHOTTKY 30V 0.5A SOD-123
MBR0540 DIODE SCHOTTKY 40V 0.5A SOD-123
MBR1035 DIODE SCHOTTKY 10A 35V TO-220AC
MBR1060 DIODE SCHOTTKY 10A 60V TO220-2
MBR1080 DIODE SCHOTTKY 10A 80V TO-220AC
相关代理商/技术参数
M1-MA-EA-AJ 制造商:Johnson Electric / Saia-Burgess 功能描述:3position lowdepth random key lockswitch 制造商:Johnson Electric / Saia-Burgess 功能描述:KEY SW./2 3POS. RAND.KEY 制造商:Saia Burgess 功能描述:KEY SW./2 3POS. RAND.KEY
M1MAWAT1 制造商:LRC 制造商全称:Leshan Radio Company 功能描述:Common Anode Silicon Dual Switching diodes
M1MCAAAE 制造商:Johnson Electric / Saia-Burgess 功能描述:KEYSWITCH DPDT 2 POS RANDOM KEY
M1-MC-AA-AE 制造商:Johnson Electric / Saia-Burgess 功能描述:DPCO random key+trapping lock switch
M1MCAAAE 制造商:Johnson Electric / Saia-Burgess 功能描述:KEYSWITCH DPDT 2 POS RAND KEY
M1MFM 60 MINS 制造商:BROYCE CONTROL ENGINEERING 功能描述:MULTI FUNCTION TIMER
M1MFM 60MINS 制造商:BROYCE CONTROL 功能描述:MULTI FUNCTION TIMER (4) 制造商:BROYCE CONTROL 功能描述:MULTI FUNCTION TIMER (4), Contact Configuration:SPDT, Time Min:0.5s, Time Max:10
M1MFT 24/110V 制造商:BROYCE CONTROL 功能描述:TIMER MULTIFUNCTION 4 FUNCTION 制造商:BROYCE CONTROL 功能描述:TIMER, MULTIFUNCTION, 4 FUNCTION 制造商:BROYCE CONTROL 功能描述:TIMER, MULTIFUNCTION, 4 FUNCTION, Contact Configuration:SPCO, Nom Input Voltage: